Object temperature measurement
8
7
Ear temperature measurement
Remove the probe cover.
Insert the probe in the ear and press the MEM button to take a measurement. The
temperature will display when you hear a beep.
Place the probe cover back on.
Prompt
Do not push the probe hard
into the ear to avoid damage.
Prompt
If the device will not be in use for 3 months or more then please remove
the batteries to avoid the batteries leaking.
Take advice from your local authority on the disposal of batteries.
The battery life is approx. 3000 readings
Replace the batteries when the device displays the low battery status
Remove the battery cover and replace the batteries, ensuring they are positioned correctly
Ensure batteries are installed to power the device. Press and hold the MEM button for
10 seconds and the screen will display all symbols. The 'object temperature mode' icon
will then display on the left side of the screen. The thermometer can then begin taking
object measurements by pointing the device at the object at 3-5mm away.
Press and hold the MEM button. When you hear a beep, the temperature will then
display on the screen.
The device only needs routine cleaning, and period or times can be decided
according to user's need.
The surface cleaning: use a clean soft cloth or cotton swab stick moistened with a
little medical alcohol or water to wipe the dirt.
Probe and sensor inner cavity cleaning: with a clean soft cloth or cotton swab dipped with
a little medical alcohol gently wipe the probe at the top of the inner cavity or sensors, and
do not use until the alcohol completely evaporates.
Please keep the inner cavity of the sensors and probes clean, otherwise it will affect the
measuring accuracy.
Replacing Batteries
Maintenance & Cleaning
Cleaning methods:
1
2
3
All settings will revert to default when the batteries are removed.
The device will automatically power off after 30 seconds of no activity
If the temperature measurement is more than 30°C the LCD screen will display red. If
the readings are below 30°C it will display green.
