Copyright Innovative Technology Ltd 2008 GA620-1
Dimensions
Note: A blank space of at least 10mm must be left on either side of the barcode
6 REPROGRAMMING THE NV200
The NV200 can be updated using the following methods:
•
Atmel Dataflash Memory Cards
•
Bank Note Validator Currency Manager Software
6.1 DATAFLASH® MEMORY CARDS
The slot at the front of the NV200 can be used to reprogram the validator from an Atmel
DataFlash® Memory card, without the need to remove the validator from the host machine.
The validator firmware, dataset and optional settings can all be programmed in
approximately 30 seconds by simply inserting a programmed memory card into the slot at
the front of the validator. If only the dataset is to be reprogrammed this time is reduced to
approximately 10 seconds (depending on the number of notes in the dataset) and if only the
optional settings are being changed (i.e. the bezel illumination colour), programming is
complete in less than one second.
Barcode Characteristics
Details
Encoding
Interleaved 2 of 5
Narrow bar width
Minimum: 0.5mm
Maximum: 0.6mm
W:N Ratio
2:1
Number of characters
Minimum: 6
Maximum: 24
Dimension
Details
A
65mm
B
120mm to 156mm
C
Minimum 10mm
D
Minimum 35mm
NV200 Operations Manual 16
