Specifications are subject to change without notice. No liability accepted for errors or omissions.
5
AUX:
Relay is energized when the battery condition test is in progress
MAINS FAIL:
Alarm indicates loss of input power after 30 sec delay.
BAT LOW:
Relay is de-energized when either:
1. battery voltage = 1.8V/cell (for 2V cells) - operates only when no input power
present
or
2. battery missing or fault in battery circuit wiring (alarm does not activate for up to
battery detection interval time).
For full list of LED flash codes please refer to page 7.
BATTERY SYSTEM OK:
LED on:
Battery present and above V batl.
POWER OK:
LED on:
Input power present
STANDBY:
LED on:
Charger in standby mode (no output from charger)
Warning:
Do not put unit into standby mode during normal operation as
“BATLOW”
alarm and low voltage disconnect are both disabled.
DIMENSIONS
304 mm
318 mm
328 mm
340 mm
7
0
m
m
7
7
m
m
225 mm
120 mm
NOTE: LOAD+ / BATT+
terminals
are linked internally and are con-
nected to the
+COM
terminal
Stud terminals
P
O
W
E
R
IN
P
U
T
ALARMS
+ COM
LOAD-
BATT-
LAN
TEMPCO
CONNECTION LAYOUT
FRONT PANEL LEDS (WITH BUILT IN SWITCHES)
ALARM RELAYS
