Listening to a Record
1. Connect the AC power cord to the main outlet,
the standard supply is AC 120V ~ 60Hz.
2. Plug the other ends of the RCA Cable into the
auxiliary input (Aux) on your TV, home
entertainment receiver or other music system, be
sure that the red RCA Cable is inserted into the
red jack and the white RCA Cable is inserted
into the white jack.
3. Switch on the unit using the POWER switch
on the front.
4. Press FUN button to select PHONO mode.
5. Put a record onto the turntable, when playing
the 45rpm record, remember to use the adapter
which packed in the polybag along with the
manual.
6. Please select the correct speed according to
the record album you want to play (33 1/3, 45 or
78 rpm).
7. Remove the tone arm-rest holder, lift the lift
handle and move the tone arm gently to the
desired position over the record, lower the lift
handle slowly, then the record will begin to play.
8. Turn on the unit which you connected with
this USB turntable by using the On/off Knob or
Volume knob, adjust the volume knob to control
the volume of the music.
9. Press STOP button to stop playing.
10. Press the PLAY button to continue playing.
11. When the music playing ends, the tone arm
will move back to the arm-rest automatically and
the indicator light will light up. Or you can
also press the eject button during the playing
time and the tone arm will lift up from the record
at that instance and then return back to the
arm-rest.
PLEASE NOTE: It will be approximately 20
seconds delay before the tone arm returns to the
tone arm rest when playing at 78 RPM speed.
12. Remember to put the white plastic needle
guard to protect the stylus and unplug the unit if
the unit is not in use for extended periods of
time.
