Innovative Technology ITRS-600BRN, Operating Manual

Page: 8 / 42

7
Listening to a Record
1. Press the POWER button to switch on the unit. Remove the white plastic
needle guard and keep it in a safe place.
2. Put a record onto the turntable. When playing a 45rpm record, remember
to plug in the adaptor on the rear of the turntable.
3. Select player speed (33 1/3, 45 OR 78 rpm) according to the record size
you are playing.
4. Remove the tone arm rest holder, lift the lift handle and move the tone
arm gently to the desired position over the record.
Lower the lift handle slowly and record will start playing.
5. Adjust the VOLUME knob to your desired volume level.
6. Adjust the TONE knob to your desired tone level.
7. To stop playing temporary, raise the lift handle or press the
PLAY/PAUSE button.
8. Lower the lift handle or press the PLAY/PAUSE button to continue playing.
9. When the music finishes playing and the tone arm reaches the end of the
record, the tone arm will return to the tone arm rest automatically with the indicator light
lighting up. Or you can press the EJECT button to move the tone arm to the tone arm rest
manually.
PLEASE NOTE: It will be approximately 20 seconds delay before the tone arm returns to the tone
arm rest when playing at 78 RPM speed.
10. Remember to put on the white plastic needle guard to protect the stylus and unplug the unit
if the unit is not in use for extended periods of time.
11. When in playing mode, always remember to keep the top cabinet open to avoid damages on
the record. Before closing the Suitcase, be reminded to take away the record.
AUX IN OPERATION
An external (auxiliary) audio source (i.e. personal CD player or MP3 player) can be connected to
this unit and heard through the speakers.
1. Plug on the end of cable (included) into the AUX IN socket on the back of the unit.
2. Plug the other end of the cable into the headphone or Line Out socket of the external source.