Operating Manual
IP Telephone IP240
- 27 -
- 27 -
6.1.2 Setting up call diversion
Proceed as follows to activate call diversion,:
1. In the initial state, press the menu key,
function key net to User Setup and next to Call Diversion.
2. With the relevant function key, select the desired setting: “Unconditional”, “Busy”
and/or “No reply”.
3. Then press the arrow down key.
Enter the desired diversion destination (name or number).
4. Save the entry by pressing the Menu key twice.
6.2. Do not disturb
This function allows you to respond in a particular way to incoming calls.
The incoming calls are categorised as:
¾
Internal Calls, External Calls , Any Call
For defined incoming calls, you can choose between three possible responses (
Action
):
Ringing
off
Your telephone will not ring for incoming calls. The setting is indicated on
the display by the
symbol.
The call is still shown on the display, however, and you can take the call
at any time.
Silence
In the “Silence” state, the ringing of your IP telephone is suspended for
incoming calls. The setting is indicated on the display by the
symbol.
Unlike with the "Ringing off" function, it is not possible to take the call. A
dial tone is nonetheless forwarded to the caller. You will see the missed
call on the display.
Busy
With this option, the call is blocked. The caller receives a busy signal.
Out of
Office
See chapter 3.7.
Tip:
Operation is faster if you assign a call diversion to a function key.
Tip:
Pressing the function key once more cancels the previous diversion setting.
