Function key configuration
Key function
Display
Description
Dial
Dials the configured number
Call Forwarding
0:
1:
2:
3: Aus
Configuration of automatic call forwarding
Up to 4 different destinations can be configured
Call forwarding unconditional on busy or on no reply
shows call forwarding on busy or no reply, Call forwarding
unconditional shows the complete number in display
Lock
0:
1:
Locks the phone, only out-bound calls using dial pad are possible
shows the phone lock
Ringer off
0:
1:
Ring tone off, status will be shown in telephone display
Call waiting
0:
1:
Off: if phone is active, in-bound call get busy signal
On: if phone is active, in-bound call will be announced
Hide own number
0:
1:
Off: provide own number in out-bound calls
On: hide own number in out-bound calls
Headset
0:
1:
Enables and disables the use of headset
shows that the headset is active
Partner
direct call
Pickup: Shows the call information of your partner
Busy status on partner side
Pickup
Shows in-bound call to group members
pick up a single call
In case of multiple calls, the list of pending call is displayed and
permit the selection of calls; use to select the call you will take
Registration
Registration of additional user fort he phone
new user becomes active user
main user still the active user
Unregistration
Unregistration of the co-user
Switch
Change active users, after which all settings for that user are active
Hot desking
Register co-user by entering name, number and password
Press again to unregister this user
Message waiting
There is a message for you
to enter the message system
Transfer
Connects the two calls that you are currently handling
Redirect
Blind transfer to the defined number
and Redirect to defined number
Enter your own configuration in these fields
