Operating manual: innovaphone IP111, IP112, IP222 and IP232 IP phones
Page 5 / 18
The phone status icons
The status of the phone is shown as an icon in the middle of the top line of the screen. A
maximum of three icons can be shown at the same time. In the case of icons that rule each
other out, only the icon that is currently active will be shown.
Not registered
Error: The phone is not connected to the telephone
system and does not work!
Second registration active
Please note: The connection to the PBX is not working.
The phone has connected to the replacement system.
Phone remains in full working order.
Microphone off
The microphone is switched off on the audio device that
is currently in use (handset, hands-free, headset). Other
audio devices are not active. The other party cannot
hear you.
Do not disturb
Depending on the configuration, the ringing is switched
off. Ringing is switched off for all calls in the default
setting - but the setting can be changed to be limited to
one call, answered with busy or completely ignored. In
addition, the setting can be limited to internal or external
calls.
Call diversion unconditional
All calls are immediately redirected to the specified
address. This call diversion overrides the other call
diversions.
Call diversion on busy
If the own phone is busy, inbound calls are redirected to
the specified address.
Call diversion on no reply.
Calls that are not answered during a set time, are
redirected to the specified address. The time lapse is 15
seconds and can be changed by the administrator.
