18
ensure the foam sealing strips on the housing remain in position.
※
Connect the air conditioner to the power and position excess cord length beneath the air
conditioner base.
※
Engage the chassis fixing brackets into the bottom housing rail and secure to the base with the
screw provided.
※
Remove the front panel from it's carton and plastic bag and fit as per the installation instruction.
Switch unit on. Check for operation of the unit and check for vibration in the installation.
※
Fit the drain pan to the housing and run a drain line to a suitable location if required.
7.4.3 Installation of the unit into the wall.
7.4.4 Installation steps.
Step 1 Remove the front panel and the air filter.
.Hold the slot under the front panel, then uplift it outwards, and remove the front panel
(See Fig. 1).
.Pinch the handle under the air filter and make the air filter arched
，
remove it from the slot from
underside to upside (See Fig.2).
Step 2 Remove the frame.
.Remove the two fixing screws from the frame (See Fig.3).
.Grasp the left corner of the frame's underside, release the coupler plugs, then loosen the frame. (See
Fig. 4).
Step 3 Installation
. Remove the two fixing screws on the chassis fixing brackets
．
Then remove the chassis fixing
