innovair PIN09H1V51, Manual

Page: 6 / 49

Preparation before use
Note
cable away from the copper tube .
Preset
Safeguarding the environment
refrigerant of the appliance is R41 A.Otherwise, chemical composition of refrigerant
(R410A) inside the system may change and thus affect performance of the air
conditioner.
pressure of the tube is very high, so be sure to be careful when you install and repair
the appliance.
service
agent or similarly qualified persons in order to avoid a hazard.
interconnection
Before using the air conditioner, be sure to check and preset the following.
Each tim e after the remote control is replaced with new batteries or is energized, re mote
control auto presetting heat pump.If the air conditioner you purchased is a Cooling Only one,
heat pump remote controller can also be used.
Hold down any button on remote control to activate the back light. It automatically shuts off
10 seconds later.
The air conditioner has an Auto-Restart function.
4
Service Manual