10
Step 7:
Unplug the Power Cord.
Install the six legs firmly into the base of the frame. The legs screw into the threaded holes
around the perimeter of the adjustable base frame (See Figure 5).
The legs are stackable and are 3”, 4” and 6”. The combination gives you a set of six
3", 4", 6",
7", 9", 10", or 13” legs
.
The minimum height for this base is 4”.
Do not over tighten.
Step 8:
With the help of your able-bodied assistant, carefully lift the adjustable bed frame and set it in
place upright on its legs. Excessive pressure and dragging the bed without lifting may damage
the legs. Remove all protective plastic covering.
Note: Check and make sure that all power cords are untangled and do not interfere with any
adjustable bed mechanisms.
Dispose of covering properly to avoid injury.