Innova OnLine 10K, User Manual, Page: 28 / 57

25
2) It is attention that the transfer time of UPS output from HE
mode to battery mode is about 10ms. But it is still too long for
some sensitive load.
5.2.6 Converter mode
In converter mode, the UPS would free run with fixed output
frequency (50Hz or 60Hz). Once the mains is loss or abnormal, the
UPS would transfer to battery mode and the load is supplied
continuously.
Fig. 5-8 Converter mode
1) The function could be enabled through the LCD setting or the
software (Winpower, etc.).
2) The load should be derating to 60% in converter mode.
5.2.7 Warning
When the warning occurs, it illustrates that there are some
abnormal problems during the operation of UPS. Normally the
problems are not fatal and the UPS continues working, but they
should be paid attention to, or the UPS may fail.
The detailed warning table is shown in chapter of 7.