1. Remove top cabinet and rear cover.
Tip: With a vertical elevator-support the top cabinet can be removed by one person.
2. Remove both the connector cable and the charger cable.
3. Unscrew the motor module by removing the 4 screws on each side of the front jib
and the 2 screws with nuts on top.
4. Gently pull the motor house backwards and off the drum.
5. Insert the new motor module and re-attach the removed cables.
NB: Make sure no wires get trapped.
6. Re-position rear cover and top cabinet.
7. Test
Integralift™ functionality.
8. Register the change of motor module in the log.
NB: If the motor, controller card or batteries have errors, these parts are to be sent to
Innova™
for inspection.
2
3
4
5
Batteries
Control board w/motor switch
Gear motor w/break