MU8012-002ANG Rev2 2016
P. 20
WARNING:
Only adaptor s and br ackets that ar e appr oved, cer tified and r ecommended by the
manufacturer are to be used with the
XTIRPA
System.
IMPORTANT:
Make sure that the lifeline cable or r ope is dir ectly positioned above the wor king
area. Only use certified lifeline cables or ropes in perfect condition, that have the appropriate specifica-
tions, including maximum lifting capacity, for the intended use of the
XTIRPA
system.
WARNING:
It is impor tant to place the
XTIRPA™
System on a har d and level surface.
Do not
use the XTIRPA™ System on a soft surface, including, but not limited to, sand, grass, gravel and
rocks.
If you have any questions about the use or maintenance or whether the
XTIRPA™
System
is appropriate for your job, please contact the Manufacturer PSP INNOVA INC.
IMPORTANT:
If necessar y, secur e the wor k ar ea with a manhole guar d to pr event falls.
WARNING:
Any system must be immediately r emoved fr om cir culation if its safety is questioned,
or if it was used to stop a fall. It is imperative not to use the system before a competent person authoriz-
es in writing the integrity of the product before its reuse.
WARNING:
For all fall pr otection devices, it is essential, for safety pur poses, that anchor ing de-
vice is always positioned correctly and that the task to be performed should be done in a manner to re-
duce risk of fall and height of fall. The anchoring point and fall protection device must be placed direct-
ly over the user’s position.
WARNING:
With the use of a fall pr otection device, it is essential for safety pur poses, to verify the
free space required under the user at the work site before each use to avoid and prevent falls, to avoid
collision with ground or any other obstacle that could be in the path of the fall.
IMPORTANT:
A har ness in accor dance with EN 361 is the only body suppor t device allowed to
be used for fall protection.
IMPORTANT:
The harness in accordance with EN 361 must be connected to the system cable or life
line rope by the anchoring point of the EN 361-compliant harness.