Innova IGZC09NI/O-1, Owner'S Manual

Page: 11 / 182

ENG
9
How to use the remote control to operate the unit
Note:
●
This is a general use remote controller, it could be used for the air conditioners with
multifunction; For some function, which the model doesn’t have, if press the corresponding
button on the remote controller that the unit will keep the original running status.
1
ON/OFF button
Press this button to turn on the unit .Press this button again to turn off the unit.
2
– :
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly
decreases set temperature. In AUTO mode, set temperature is not adjustable.
3
+ :
Press this button to increase set temperature.Holding it down above 2 seconds rapidly
increases set temperature. In AUTO mode, set temperature is not adjustable.
4
MODE :
Each time you press this button,a mode is selected in a sequence that goes from AUTO,
COOL,DRY, FAN,and HEAT *, as the following:
AUTO COOL DRY FAN HEAT *
,
,
, ,
*Note:Only for models with heating function.
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be
displayed on the LED of the indoor, and the unit will automatically select the suitable operation
mode in accordance with the room temperature to make indoor room comfortable.
5
FAN :
This button is used for setting Fan Speed in the sequence that goes from Auto,
,
,
, ,
to
,
,
, ,
then back to Auto.
Auto
Low speed Low-Medium speed
Medium-High speed High speed
Medium speed
,
,
, ,
• X-FAN function: Hold fan speed button for 2s in COOL or DRY mode, the icon ” ” is
displayed and the indoor fan will continue operation for a few minutes in order to dry the
indoor unit even though you have turned off the unit. After energization, X-FAN OFF is
defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed after the
unit is stopped to avoid mould.
• Having set X-FAN function on: After turning off the unit by pressing ON/OFFbutton indoor
fan will continue running for a few minutes. at low speed. In this period, Hold fan speed button
for 2s to stop indoor fan directly.
• Having set X-FAN function off: After turning off the unit by pressing ON/OFF button,
the complete unit will be off directly.