Innova 31603, Owner'S Manual, Page: 52 / 104

Using the Scan Tool
VIEWING ABS DTCs
50 OBD2
In the case of long code definitions, a small arrow is shown in
the upper/lower right-hand corner of the code display area to
indicate the presence of additional information. Use the
UP
and DOWN buttons, as necessary, to view the
additional information.
„ The Scan Tool will display a code only
if codes are present in the vehicle’s
computer memory. If no codes are
present, a "No ABS DTC’s are pre-
sently stored in the vehicle’s computer"
is displayed. Press the
button
to return to the Enhanced Main Menu.
4. If more than one code was retrieved press the button, as
necessary, to display additional codes one at a time.
„
Whenever the Scroll function is used to view additional codes,
the Scan Tool’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press the
POWER/LINK button again.
5. When the last retrieved DTC has been displayed and the
button is pressed, the Scan Tool returns to the Enhanced Main Menu.
„ To exit the enhanced mode, press the button. The Scan
Tool returns to the DTC screen.
Erasing ABS DTCs
If you plan to take the vehicle to a Service Center for repair, DO NOT
erase the ABS DTCs from the vehicle’s computer. If the codes are
erased, valuable information that might help the technician troubleshoot
the problem will be erased.
1. With the Scan Tool in ”ABS Mode” (see Reading ABS DTCs on
page 48 for details), press the
ERASE button.
2. A confirmation message shows on the
LCD display.
„ If you are sure you want to proceed,
press the
ERASE button to
erase the ABS DTCs from the
vehicle’s computer.
„ If you do not want to continue with
the erase process, press the
button to exit the erase
mode and return to the Enhanced Main Menu.
3. If you chose to erase ABS DTCs, a progress screen displays while
the erase function is in progress.