Innova 3100j, Owner'S Manual, Page: 48 / 108

Using the Diagnostic Tool
VIEWING OEM ENHANCED DTCs
46 3100j
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, a small arrow is
shown in the upper/lower right-hand corner of the code
display area to indicate the presence of additional
information. Use the
UP and DOWN buttons,
as necessary, to view the additional information.
„
For additional help with a displayed DTC, use the UP and
DOWN buttons, as necessary, to highlight Help , then press
the ENTER button.
„ The diagnostic tool will display a
code only if codes are present in the
vehicle’s computer memory. If no
codes are present, a “System Pass”
message is displayed. Press the
M
button to return to the Main Menu.
6. If more than one code was retrieved
press the
DTC button, as necessary, to
display additional codes one at a time.
„
Whenever the Scroll function is used to view additional codes,
the diagnostic tool’s communication link with the vehicle’s
computer disconnects. To re-establish communication, press the
POWER/LINK button again.
7. When the last retrieved DTC has been displayed and the DTC
button is pressed, the diagnostic tool returns to the “Priority” code.
„ To view additional enhanced DTCs, repeat steps 1 through 6 ,
above.
„
To exit the enhanced mode, press the SYSTEM MENU
button to return to the System Menu. Use the UP and
DOWN buttons, as necessary, to highlight Global OBD , then
press the ENTER button to return to the Global OBD2 mode.
General Motors/Isuzu Enhanced DTCs
When GM OEM Enhanced is chosen from
the System Menu, the diagnostic tool
retrieves OEM enhanced DTCs from the
vehicle’s computer.
1. A “One moment please” message
displays while the diagnostic tool
retrieves the selected DTCs.
„
If the diagnostic tool fails to link to
the vehicle’s computer, a
“Communication Error” message
shows on the diagnostic tool’s
display.