11
EN
SANDWICH-13 / 180626 / www.innotech.at
10
INSTALLATION SUBSTRUCTURE
The basic requirement for professional/proper installation is
-
a corrugated sheet roof laid as per the applicable standards/regulations:
(Material thickness of steel ≥ 0.6 mm),
-
a statically bearing substructure and
-
the use of the original fasteners listed in these instruction manual.
During installation, the coating of coated metal sheeting must NOT be damaged.
DANGER TO LIFE as a result of installation on unsuitable assembly
substructure.
-
Install INNOTECH "SANDWICH-13" onto a statically load bearing metal
roof system.
-
Ensure that the substructure is statically load-bearing. In cases of
doubt, have the installation substructure examined by a statics engineer
or by the manufacturer.
!
DANGER
11
INSTALLATION TOOL
[mm]
AF = 24
AF = 10
2x
