320 Main Street Port Jefferson NY 11777 (516) 928-6888 FAX (516) 473-5259
41 Winter Street Boston MA 02108 (617) 695-2700 (617) 423-0466
first codes are the latest models.
4. Enter the correct code on the number pad. The
light will flash once for each key pressed.
5. Press the
[PROG]
button again to lock in the
code. The light should flash 3 times, and pro-
gramming is finished. For example, to program a
Sony TV:
First, find the Sony codes in the code list.
Then, try the first (latest model) code. Press:
[TV] [PROG] [0] [3] [8] [PROG]
When finished, try to operate the TV with the
remote. If the remote works with the TV, the
programming for the TV is finished. If the remote
does not work, try the next code: 141, and so-on,
until the correct code is found. If you cannot find
the correct code, refer to the Auto Search feature.
SPECIAL FEATURES
The IC4001 Universal Remote Control Integrated
circuit has several special features:
Punch Through
Some TVS, VCRs, and cable box controls may
work at the same time. For example, after you
press the
[C/SAT]
or
[VCR]
buttons, the volume
controls may still work with the television. Other
functions may also work this way. Availability of
this feature varies depending on the type of TV,
VCR, and cable box used.
Read Back Programmed Code
The remote can read back the codes selected for
TV, VCR, and cable box, so they can written
them down and used for future reference. To do
this:
1. Press the device key that you want the code
read back for. For example, if you want to get the
code for your TV, press the
[TV]
key.
2. Press
[PROG]
. The light should flash twice.
3. Press
[1]
and then
[PROG]
. The light will
flash the number of the first digit of the code. For
instance, if the TV’s code is 567, the light will
flash five times. If a digit of code is zero, the light
will not flash.
4. Repeat the last two steps to get the second and
third digits of the TV code, by pressing
[2]
and
[PROG]
for the second digit (light flashes six
times) and
[3]
and
[PROG]
for the third digit
(light flashes seven times). This procedure can
then be repeated for the VCR and cable box.
Substitute Devices
Users can substitute devices with universal remote
controls based on the IC4001. All of the three
device buttons (TV, VCR, and C/SAT) can be
programmed as either a TV, VCR, or cable box.
To program a TV on the VCR device button:
1. Press
[VCR]
and then
[PROG]
. The light will
flash twice.
2. Instead of entering a VCR code, enter the TV
code for the desired TV. The light will flash once
for each digit.
3. Press
[PROG]
, and the light will flash 3 times.
Now the VCR button will act as a second TV.
This works with all three devices, so it is possible
to program up to three TV’s, VCR’s, and cable
boxes. For example, to program a Sony TV in the
cable boxes place, press:
[C/SAT] [PROG] [0] [3] [8] [PROG]
Now the C/SAT button will act as a Sony TV.
