9/30/98 © Innotech Systems Inc. 1998 All Rights Reserved
320 Main Street Port Jefferson NY 11777 (516) 928-6888 FAX (516) 473-5259
41 Winter Street Boston MA 02108 (617) 695-2700 (617) 423-0466
Auto Search For Correct Code
If users have trouble programming the remote, or
can’t find the correct code in the manual, the
remote can cycle through available codes rapidly
to help locate a usable code. It is recommended
that this feature be used only when all other
methods have failed, as users may have to cycle
through many codes before finding a usable one.
1. Manually turn on the device to control.
2.
[TV]
or
[VCR]
or
[C/SAT]
'
Press the device key for the device code being
searched for. For example, to search for a TV
code, press
[TV]
once. (1 Flash)
3.
[PROG]
'
'
Press the
[PROG]
button once. (2 Flashes)
4.
[AUTO]
Press the Auto button.
'
The remote control will now search through the
library for the target device code in 3 second
intervals. Every 3 seconds the user will be
prompted by the light flashing and the remote will
attempt to turn the power off.
When the device turns off, the user should
immediately press the
[PROG]
key to save the
code. Check the other buttons to ensure they all
work with the target device. If they do not, repeat
the preceding auto search steps.
To stop Auto Search, press any key except
[AUTO]
.
Manual Search For Correct Code
The user can manually toggle through the device
codes to find the correct code for a TV, VCR or
Cable/Satellite.
1. Manually turn on the device.
2.
[TV]
or
[VCR]
or
[C/SAT]
'
Press the device key for the device code you want to
search for. For example, to search for a TV code,
press
[TV]
once. (1 Flash)
3.
[PROG]
'
'
Press the
[PROG]
button once. (2 Flashes)
4.
[0]
'
[0]
'
[0]
'
Press
[0] [0] [0]
(Flashes once for each digit
pressed)
5.
[PROG]
'
'
'
Press the
[PROG]
to change to the next device
code. Every time
[PROG]
is pressed, the device
code will increment..
6.
[TV]
or
[VCR]
or
[C/SAT]
'
Press the device key again to lock in the code.
NOTE: Some devices, such as cable boxes, may
not support power buttons on the remote. In this
case, you can substitute
[CH+]
or any other
supported button to test the code.
DEVICE CODES
For a code list of supported devices and associated ISI codes, please contact Innotech Systems for the
document “Index of Device Codes.”
