INNO-P11 User’s Guide
INNOSTREAM Confidential
PAGE : 48 of 99
saved.
Save : Saves the E-mail message and the recipient E-mail address.
Save and Send
:
Saves the E-mail message and the recipient E-mail address, and then sends.
<Drafts>
With this menu, you can view a list of any draft E-mail messages that have been created in the
Create Message and saved, but have no subject or no recipient.
Subject or front side of each E-mail message is displayed on the list.
If you press [Option soft key], Delete, Send , Edit and View Detail options are available.
<Sent>
With this menu, you can view a list of E-mail messages that have been sent.
Subjects are displayed on the list.
If you press [Option soft key], Delete, Send, Edit and View Detail options are available.
With Send option, you can send the saved E-mail message unchanged as it is.
! Note : The attachment size of sending E-mail message cannot exceed 45 Kbytes and the
maximum size of sending E-mail message is 100 Kbytes.
<E-mail Setting>
The following options are available.
Data Connections
With this menu, you can configure which Data Connections is used to connect over when
sending or receiving E-mail message.
The information can be obtained from your home network service provider.
If you want to add or edit Data Connections, go to the Data Connections menu of Phone Setting
menu.
E-mail Accounts
With this menu, you can view E-mail Accounts list and add new E-mail Account. The following
options are available.
Set Default : Sets the selected E-mail Account as default account to use sending a E-mail
message.
Edit
:
Edits the selected E-mail Account. With this option, you can set up Incoming Server,
Outgoing Server ,My E-mail Address and My Name.
You can select Incoming Server Server type between POP3 and IMAP.
The Username and Password are generally the login information related to the
Incoming Server, but those may be also necessary for the Outgoing Server depending
on network service provider.
Outgoing Server information can be obtained from your home network service
provider. If you want to use your own Outgoing Server, you have to check that your
E-mail account can support POP3(or IMAP) and SMTP.
My E-mail Address is used for the default E-mail address to send E-mail message.
To send E-mail message, you must set your E-mail address in this menu.
My Name is used to insert your name in sending E-mail message.(Optional)
