3
2.2 CONNECT THE PSU
Every hash board needs to be inserted with
2 PSU cable
, controller only needs 1 PSU cable according to
the following image .
Note: Please contact out after-sales team if there is a hashboard not work.
2.3 CONNECT THE ETHERNET CABLE
Insert one end of the Ethernet cable into the router and the other end into the slot shown in the following
image.
IP SET button
:
Press it 1—4 seconds, it will (1) show the IP of the miner in the “Set IP” tool; (2) change the miner to Static
IP mode and modify the IP to the IP range you set in the “Set IP” tool
Press it 4—15 seconds, the miner will become to DHCP and the settings of the miner should be restore to
default.
Press it more than 20 seconds to switch the Dynamic (Static) IP to Static (Dynamic)
RESET button
: Your miner will restart if you press it. It wont recover your settings to the default.
INNOSILICON CONFIDENTIAL
A9 ZMaster
INNOSILICON CONFIDENTIAL
