© 1998-2014 InnoMedia, Inc. All rights reserved.
Page 70
InnoMedia MTA8328-1U Administrative Guide
Appendix A1. LED States
LED STATES
Interfaces
Blinking State
MTA8328-1U Device State
PWR
Steady Green
The device power is on.
Off
The device power is off.
WAN
Solid Green
WAN 100BT link is active, device has IP address
AND DNS resolution is successful.
Solid Yellow
WAN 10BT link is active, device has IP address
AND DNS resolution is successful.
Off
WAN link is not connected. This is the same
condition in which the "no WAN link" IVR is
played.
Fast Blinking Green
(0.25 sec. on, 0.25 sec.
off)
WAN 100BT link is active but device is unable to
get an IP address OR is unable to reach a public
IP address. This is the same condition in which
the “no internet connection” IVR is played.
Fast Blinking Yellow
(0.25 sec. on, 0.25 sec.
off)
WAN 10BT link is active but device is unable to
get an IP address OR is unable to reach a public
IP address. This is the same condition in which
the "no Internet connection" IVR is played.
Medium-Slow Blinking
Green (1 sec. on, 1 sec.
off)
The device firmware is being upgraded. The
PHONE LED blinks in unison with the WAN LED
in this state.
PHONE
Off
The device has no power, OR
The device is powered on and initializing, OR
The device is being provisioned, OR
The device has initialized & been provisioned,
but failed to register.
Steady Green
The device is registered and ready to make
calls, and the telephone handset in on-hook.
(not in use)
Slow Blinking Green (3
sec. on, 1 sec. off)
The device is registered and ready to make
calls, and the telephone handset in on-hook
(not in use), and there are new voicemail
messages.
Medium-Fast Blinking
Green (0.5 sec. on, 0.5
sec. off)
The device is registered and ready to make
calls, and the telephone handset in off-hook (in
use). Irrespective of voicemail state.
