© 1998-2014 InnoMedia, Inc. All rights reserved.
Page 6
InnoMedia MTA8328-1U Administrative Guide
1
Introduction
1.1
Product Overview
MTA8328-1U uses your broadband connection to deliver voice quality and features equivalent to those of
the PSTN. It is compatible with standard analog telephone sets, and it is very easy to install and configure.
MTA8328-1U can be connected via a USB cable (to a PC or laptop) to obtain network connectivity.
1.2
Package Contents
The MTA8328-1U package comes with the following items:
Item List
Quantity
MTA device
1
USB Cable
1
1.3
Setup
This section provides a step-by-step procedure to install the MTA8328-1U and setup the system for
connecting to a broadband network.
Follow these steps to setup the MTA.
Step 1
Install the host driver software; make sure the driver is successfully installed.
** Please be aware, skipping this step or incorrectly installing the driver will result in the
failure of later activities in this manual.
** For more information, please go to our host driver installation guide.
Step 2
Network – Connect the USB cable into the “PC USB” port on the MTA and connect the
other end into an available USB port on the PC or laptop
Step 3
Phone – Connect your phone to the “PHONE” port on the MTA.
