InnoMedia HG8328-1W Administrative Guide
Page 45
Copyright © 2019 InnoMedia. All rights reserved.
Server Port
Port to be used to connect to the
Provisioning Server.
ConfigURL/Filename
Specify the complete path and the config file
name to download.
UserAgent Header
User Agent Header sent out is modifiable.
Available parameters:
Model name ($MOD)
MAC ($MAC). The Ethernet WAN MAC
address is chosen as the device ID.
Version ($VER)
Config file last loaded ($CFG)
Example Syntax: $MOD $MAC $VER $CFG.
Output: MTA-8328-1E 001099112233
V1.0.0.0 /Provisioning/Config/xyz.cfg
User ID
The User ID used for HTTP, FTP, and HTTPS
authentication purposes
Password
The Password used for HTTP, FTP, and
HTTPS authentication purposes.
Protocol
The Protocol to connect to the server.
Supported protocols are: HTTP, HTTPS, FTP,
and TFTP.
Encryption
The Encryption Format of the config file to
be sent to the MTA. Supported formats are:
None, RC4, and AES-256.
Encryption Key
The encryption key to be used for
encryption. Below is a table of the number
of characters for each Encryption Type and
Key Method.
RC4
AES-256
Inno
32 chars
N/A
Openssl
32 chars
64 chars
Key Method
The following utilities (or approaches) can
be used to encrypt the provisioning config
file: Inno and Openssl.
Inno
– InnoMedia proprietary hash key
encryption utility. This method can only be
applied when “RC4” is selected from the
Encryption menu. Provisioning config file
should be encrypted using the utility –
rc4_102 See Appendix A The use of
encryption key methods.
Openssl
– the open source toolkit. This
method can be applied when either RC4 or
