Deploying BT200 for Voice-Enabled Workplace
Page
30 of 35
Password
Account password (SIP password).
Display
Name
Name to be displayed as the Caller ID.
Authentication ID
Authentication ID if needed.
Call Features
Enable device based call features if needed.
These call features are available for the use of
connected analog phone.
Table 4. BT200 port settings: assigned extension number
Figure 31. Configure the assigned extension number
Figure 32. Enable device based call features
5.
Check if the BT200 successfully registers to the enterprise SIP PBX and is ready to make
phone calls. Navigate to
Telephony
>
Port Config
. The phone status icon shows successful
icon ; otherwise check if the settings are correct.
Figure 33. BT200 line status
