9
USING THE PRODUCT
This product is designed for the removal of corns and calluses from the feet. Do not use the
product in other parts of the body. Do not use this product on open wounds or damaged
skin. Clean and thoroughly dry the area to be treated. Remove the cap and turn on the device
by sliding the power switch upward; the LED light comes on. The exfoliating head will start
spinning. Touch the exfoliating head to the area on your foot that you would like to treat.
The LED light will help illuminate the affected area. Press gently at first, then apply more
pressure as you feel comfortable. If you press too hard, the exfoliating head will stop spinning.
Gently move back and forth or side to side for no more than 2-3 seconds at a time until
callused skin is removed.
WARNING: As soon as you feel the skin
renewed, or when the calloused area
is removed, stop using the product.
Once you achieved the desired results,
turn off the device by sliding the power
button down, clean the exfoliating head
(see Cleaning Product) and place the lid on
the head.
CLEANING PRODUCT
Clean the head after each use to ensure the correct functioning of the product. Make sure the
device is turned off before proceeding with cleaning.
Remove the head from the main unit, by pressing the Head Release button on the side. Use
the included cleaning brush to remove loose skin of the head. Rinse the head under running
water. The central unit is water resistant, but not waterproof. Never immerse the main unit in
water or other liquids. Clean the central unit with a soft cloth dampened with water.
Always wipe the unit and the head carefully with a soft cloth.
GB
RATING LABEL
