11
GB
INSERTING BATTERIES
Remove the battery cover on the back side of the unit. Insert
the 2 AA batteries, respecting pola and – shown in
the compartment itself. Replace the battery cover.
USEFUL ADVICE
- Do not treat your nails applying too much pressure
on them. Do not force the attachments thus avoiding
possible damages to the main unit.
- Treat gently and slowly your nail with the chosen
attachment.
- Stop treating your nails from time to time, to check
the result.
- Nail shortening: it is advisable to move gently the
attachment from the outside of the nail following the
nail crown.
- Nail polishing: move the attachment gently with
circular movements. Do not let the polishing attachment
resting on one particular nail zone, but move regularly
the disk. It advisable to select the low speed and treat
every nail for 15 seconds at most.
SWITCHING ON/OFF
Remove the head cover, insert the attachment chosen,
replace the head cover and switch the device on by
moving the ON/OFF button upwards.
The product has been conceived for a consequent usage
of 20 minutes. Too long treatments could lead to an
overheating and consequently a product shorter life. If
you need to treat your nails for more than 20 minutes,
it is advisable to stop the appliance for 15 minutes, let it
cooling down and then start the treatment again.
CLEANING THE DEVICE
Never dip the main unit in water or other liquids. Clean
the main unit with a soft, damp cloth and always dry
with care.
Cleaning the attachments: use a small soft brush to
remove any possible residues of skin and nails.
Then cleaning with a soft damp small brush.
COMPONENTS OF ELECTRONIC NAIL SHINER AND
BUFFER
