3
4
5
To switch the iTaste VTR between Variable Voltage mode and Variable Wattage mode you press the
“function key” for one second to display the Ohm reading of the attached atomizer or clearomizer.
While this the Ohm reading is displayed, press and hold the “Function key” again till the display
shows that you have changed either from Voltage to Wattage or vice versa.
Rotational Wheel can be rotated clockwise (+) and counterclockwise(-) to adjust the voltage or
wattage.
Rotational Wheel can be rotated clockwise (+) and counterclockwise(-) to adjust the voltage or
wattage.
Quickly clicking it three times will enable or disable the battery. Once enabled, holding down the
button will activate the battery.
This safety feature prevents the atomizer from turning on while it's in your pocket or bag and it
prevents any settings from getting changed without your knowledge.
“ ” button: ON/OFF battery switch.
ON Mode
Quickly clicking the “ ” button three times will turn the iTaste VTR on; your LED light will blink from
red to yellow to green; and the LCD will display “ON”. Once turned on, holding down the “ ” button
will fire the device.
OFF Mode
Quickly clicking “ ” button three times turns the device off. The digit screen will show “OFF” to
confirm that your device is in the off mode.
Battery Capacity Display
The LED lights will show green, yellow or red to indicate whether there is full battery life, half capacity
or charging needed.
There are three main buttons on the iTaste VTR:
The “ ” button, “rotational wheel” and "function
key" which is located in the center of the rotational wheel ; all the functions can be activated by using
those three buttons to change settings in one step, your chosen mode will be displayed on the digital
screen.
Function key button
: Activates the Resistive Load Detection ( Ohms meter ) and shows the last
7/EN-7
8/EN-8