OPERATION GUIDE
When a battery is installed, the LED light will blink from red to yellow to green and the digital display
will show 88.8. the iTaste VTR will be in off mode.
1. Function key
2. Rotational wheel
3. Digit LED display
6. Clearomizer/Atomizer
7. Cone adapter connector
( Will fit iClear10, iClear16,
and iClear30 clearomizers,
T2,T3 , Genesis system etc,
as well as standard 510 accessories
8. Battery cap
9. Battery cap release switch
6. Clearomizer/Atomizer
4. LED light display
5. Power button
1
2
1
2
3
4
5
Press the “Function Key” for 2 seconds to check Ohms of your attached atomizer or clearomizer
(please note the digit screen will stay display Ohms until you release button)
To display the current voltage or wattage setting, press and hold the “function key” for one second
and release. The digital screen will display the volts or watts setting.
5/EN-5
6/EN-6
