Check Atomizer:
When the atomizer is not connec�ng properly , or resistance more than 9.9 Ohm ,
the screen will display
" CHECK ATOMIZER ".
The CoolFire MINI features automa�c real-�me ba�ery voltage detec�on.
Overheat Protec�on:
The screen will display " TOO HOT " if the PCB is overheated.
The CoolFire ACE features automa�c real-�me PCB Chipset temperature
detec�on.
Over-Discharge Protec�on:
The CoolFire MINI Advanced Personal Vaporizer monitors the ba�ery voltage and
will automa�cally power off when the ba�ery over discharged.
11
10
Low Voltage Warning
The Red LED and Ba�ery bar will blink when the ba�ery capacity is lower than 3.3V
and the CoolFire MINI will automa�cally power off.
Short Circuit/Atomizer Protec�on:
Short Circuit/Atomizer Protec�on protects the CoolFire MINI Advanced Personal
Vaporizer against shorted atomizers and will stop the unit from func�oning in
unsafe condi�ons.
The CoolFire MINI features automa�c real-�me atomizer Ohms detec�on. If the
resistance of the atomizer is lower than 0.2, the Ohms bar will blink and the
CoolFire MINI will not power on.
0.50Ω
0.00V
40
.
0W
0.20Ω
0.00V
40
.
0W
SHORTED
0.50102
4.20V
100