17
16
Enter Variable Voltage Mode:
Press and hold the “-” bu�on and the “
” bu�on for 2 seconds to enter variable voltage
mode.
In variable voltage mode the CoolFire MINI voltage can be adjusted from 3.0 to 7.5 volts
in .1 volt increments by pressing the "+" or "-" bu�ons.
Adjust Variable Voltage:
When the CoolFire MINI is in variable voltage mode press the "+" or "-" bu�on one
�me and then press it again to decrease the voltage. Hold the bu�on down to
quickly increase or decrease the set voltage.
The CoolFire MINI voltage can be adjusted from 3.0 to 7.5 volts in .1 volts
increments by pressing the "+" or "-" bu�ons. If the voltage is decreased below 3
volts it will cycle up to 7.5 Volts. If the voltage is increased from 7.5 Volts it will
cycle down to 3 volts. Press the bu�on " " to lock the set voltage and fire the
CoolFire MINI.
Important: Explaining Low-Resistance / High Wa�age Vaping
To ensure you have the best possible vaping experience it is important to have a
basic understanding of wa�age, voltage and coil resistance. There is a range of
standard coil resistances: 2.1, 1.7, 1.4, 1.1, 0.8, 0.5 ohm etc and Rebuildable
Atomizers or Drippers (RBA/RDA) may even be lower. The CoolFire MINI can fire
between resistances of 3.1 to .2 ohm and you can clearly see the resistance of the
a�ached clearomizer on the OLED screen.
We would suggest that for coil resistances of 1.7 – 2.1 ohm you can begin with a
se�ng of 8 Wa�s and then increase the Wa�age un�l you find your perfect
se�ng. For resistances of 0.5, you can try a se�ng of 25 Wa�s and increase the
wa�age un�l you find your perfect vaping se�ng.
We would suggest that for coil resistances of 1.7 – 2.1 ohm you can begin with a
se�ng of 4.0 Volts and then increase the Voltage un�l you find your perfect
se�ng. For resistances of 0.5, you can try a se�ng of 3 Volts and increase the
voltage un�l you find your perfect vaping se�ng.
0.50Ω
0.0W
4.00V
