19
18
Overheat Protection
The screen will display "TOO HOT" if the PCB is overheated.
The Cool Fire IV Plus features automatic real-time PCB Chipset temperature
detection.
Important: Explaining Low-Resistance / High Wattage Vaping
To ensure you have the best possible vaping experience it is important to have a
basic understanding of wattage, voltage and coil resistance. There is a range of
standard coil resistances: 2.1, 1.8, 1.5, 1.1, 0.8, 0.5, 0.2Ω etc and Rebuildable
Atomizers or Drippers (RBA/RDA) may even be lower. The Cool Fire IV Plus can
fire between resistances of 3.5 to .1Ω and you can clearly see the resistance of the
attached coil on the OLED screen.
Wattage:
For coil resistances of 1.7 – 2.1Ω you can begin with a setting of 8Watts and then
increase the Wattage until you find your perfect vaping setting.
For 0.5Ω coils you can start with 22 Watts and increase the wattage until you find
your ideal temperature and flavor.
For 0.2Ω coils you can start at 25 Watts and increase the wattage until you find
your perfect balance of flavor and clouds.
If you have any questions please contact your local Authorized Innokin Vendor or
.
Important:
The Cool Fire IV Plus will only fire variable voltage or variable wattage depending
on the last setting chosen; it will not fire both. You must choose either Variable
Voltage or Variable Wattage.
TOO HOT
Summary of Contents for Cool Fire IV Plus
Page 1: ...USER MANUAL...