12
GB
NOTICE:
- please do apply skin care products or mask before use the device, as microcurrent
that are released during the massage increases the effectiveness of the active in-
gredients contained in creams and preparations.
- Working conditions: Temperature from -20°C to +60°C , Humidity from 10% to
95%; Atmospheric Pressure from 700 to 1060 hPa;
- Transport and Storage conditions: Temperature from 10°C to +40°C , Humidity
from 30% to 75%, atmospheric pressure from 700 to 1060 hPa;
NOTICE FOR DIFFERENT SKIN TYPE
Normal, dry skin: use the device once/week, 5 minutes every time
Oily skin: twice a week, 5-10 minutes every time
Sensitive skin: once/ 4-5 days, 5 minutes every time
Freckle skin: use with specific skin care products, once/week, 10 minutes every time
Aged skin: use the device twice/week, 10 minutes every time
It is normal to feel slight sting and tickle feeling caused by microcurrent during
treatment. In case you feel some pain or redness occure, you must stop using the
appliance and consult your physician.
MAINTENANCE AND CARE
After every use, clean the product with a soft cloth dampened with water.
- Do not use any solvent to clean the product
- Do not use rough clothes for cleaning the applicator
- Do not dip the product directly into water
over the face. Hold the device in one clean, bare hand , making sure the ion sensors
on both sides have good contact with the skin of the bare hand.
While looking in the mirror, lightly contact the facial treatment head on the face.
Slowly glide the device from inside to outside, from down to up toward to hairline
To turn off the device push the ON/OFF switch to middle place. The LED turns off.
IMPORTANT: during treatment, please always keep your finger contact on the ion
sensor on both parts of the device to form a circuit loop.
