1.8” SATA SSD 3SE
11
Rev. 1.1 TPS, Jan. 2015
1.8 CE and FCC Compatibility
1.8” SATA SSD 3SE conforms to CE and FCC requirements.
2.6 RoHS Compliance
1.8” SATA SSD 3SE is fully compliant with the RoHS directive.
2.7 Reliability
Parameter
Value
Read Cycles
Unlimited Read Cycles
Wear-Leveling Algorithm Supported
Bad Blocks Management Supported
Error Correcting Code
Supported
TBW (Unit:TB)
8GB 432 (Sequential Write)
16GB 864 (Sequential Write)
32GB 1728 (Sequential Write)
64GB 3456 (Sequential Write)
128GB 6912 (Sequential Write)
256GB 13824 (Sequential Write)
2.8 Transfer Mode
1.8” SATA SSD 3SE support following transfer mode:
Serial ATA III 6.0Gbps
Serial ATA II 3.0Gbps
Serial ATA I 1.5Gbps
2.9 Pin Assignment
Innodisk 1.8” SATA SSD 3SE uses the standard SATA pin-out. See Table 8 for 1.8” SATA SSD 3SE
pin assignment.
Table 8: InnoDisk 1.8” SATA SSD 3SE Pin Assignment
Name Type
Description
S1
GND
NA
S2
A+
Differential Signal Pair A
S3
A-
S4
GND
NA
S5
B-
Differential Signal Pair B
S6
B+
S7
GND
NA
Key and Spacing separate the signal and power segments
