![background image](http://html1.mh-extra.com/html/innocigs/egrip-2-light/egrip-2-light_user-manual_2062443057.webp)
55
INNOCIGS EGRIP 2 LIGHT – CHANGING & OPERATING OF MODES
3. Adjusting the wattage in VT mode
Note
You can set the maximum power output in VT mode. Press the fire button 3 times to enter the menu. Press the “down“ button, so
that the second line flashes. Then press the “up“ button to adjust the wattage. Confirm this by pressing the “fire“ button.
a) The VT mode supports a maximum resistance of 1.5 ohms. The device automatically switches to the VW mode when
the resistance is more than 1.5 ohms.
b) When using coils with Kanthal winding, the unit will change to VW mode after two seconds.