CAUTION:
Avoid rubbing with any abrasive or with the base of the pans, etc, as this will wear the
markings on the top of the induction hob over time. Clean the induction hob on a regular
basis to prevent the build up of food residue.
Never use:
•
Undiluted washing-up liquid
•
Detergent intended for dishwashers
•
Scouring agents
•
Harsh cleaning agents such as oven spray or stain remover
•
Abrasive sponges
•
High-pressure cleaners or steam jet cleaners
Care & maintenance
In the event of a fault, the induction hob will automatically enter safety mode and diagnose the likely issue. The most
common error codes are shown below
Error Code
Error Message
Solution
ER03
Water or pan on the Control Panel
Clean the Control Panel or move the pan
E1
Hob has over heated
Allow to cool and restart after 30 minutes
E2
Hob has over heated
Allow to cool and restart after 30 minutes
E3
Abnormal power supply detected (too high)
Ensure the correct power supply is being used
E4
Abnormal power supply detected (too low)
Ensure the correct power supply is being used
E5
Temperature sensor failure Defective cooking zone
will display an ‘E’
Contact Customer Services
F1, F3, F4
Hardware failure
Contact Customer Services
If the Control Panel overheats it will change colour and sound an
audible alarm.
Allow to cool and restart after 30 minutes
If your hob develops a fault
36
