INNOBIZ Audelia, Instructions For Use Manual

Page: 11 / 74

11
en Troubleshooting:
If the product is knocked over by mistake when in use, the water may spill
out into the base (B).
If this is the case, unplug the mains adapter (C), empty out as much of
the water as you can and leave the diffuser to dry in a vertical position, in
a dry, well-ventilated area, for at least 3 days. After this, if you notice any
dysfunction, ask your retailer for advice.
If your Audelia no longer produces any mist, here are a few possible
explanations and their respective solutions:
1. Your Audelia is not plugged in. Make sure that there is a good connec-
tion with the diffuser and that your mains plug is working correctly.
2. There is no more water (or not enough). In this case, add water without
exceeding the maximum level (2).
3. There is too much water. Make sure that you do not exceed the maxi-
mum water level (2) and empty out any excess water.
4. The lid is blocked by water droplets or other particles. Clean the lid
thoroughly and make sure that the air outlet (3) is clear.