Innoband AV 200P-I1, User Manual

Page: 25 / 32

- 25 -
Diagnostics Tab
The
Diagnostics Tab
screen shows System information and a history of all remote devices seen
over a period of time.
The
Upper panel
shows technical data concerning software and hardware present on the host
computer which were used for communication via HomePlug device on the Powerline network.
The data includes the following:
• Operating System Platform/Version
• Host Network Name
• User Name
• MAC Address of all NICs (Network interface card) connected to the host
• Identify versions of all Driver DLLs and Libraries used (NDIS) and optionally
• MAC Firmware Version
• MAC addresses of all devices connected locally to the host
• Version of the Configuration Utility
• Vendor name
• Microprocessor
The
Lower panel
contains a history of all remote devices seen on the computer over a certain
period of time. All devices that were on the powerline network are listed here along with a few
other parameters. Devices that are active on the current logical network will show a transfer rate
in the Rate column; devices on other networks, or devices that may no longer exist are shown
with a “?” in the Rate column. The following remote device information is available from the
diagnostics screen: