Innoband AV 200P-I1, User Manual

Page: 24 / 32

- 24 -
Privacy Tab
Privacy Tab is to allow user the convenience to manage the security of the private powerline
network and to enable the adding of new HomePlug device to the private network.
All HomePlug devices are shipped using a default logical network name “HomePlugAv”. The
Privacy tab screen allows user to change its default public network type to a private network by
changing the network name (network password) of devices.
The user can always reset the network type to HomePlug network (Public) by entering
“HomePlugAv” as the network name or by clicking on the Use Default button.
Note
: Changing the network name to anything other than HomePlugAv will show the network
type on the main screen as Private.
Set Local Device Only
button can be used to change the network name (network password) of
the local device. If a new network password is entered, all associated devices seen on the Main
Tab prior to this will be no longer present in the new network, rendering the local device unable to
communicate with other devices in its previous network.
Set All Devices
button is used to change the logical network of all devices that appear on the
Main tab screen whose Device Password had been entered for the same logical network. A
dialog window will appear to report the success of this operation. For devices whose device
passwords were not entered, this operation will fail and will report a failure message.