Innoband 8520-R1 User Manual Download Page 71

Page: 71 / 131

8520-R1 4-Port Wireless N Gateway

4.6.3.2 Service

– Firewall – MAC Filtering

The MAC filtering feature allows you to define rules to allow or deny frames through the device based

on source MAC address, destination MAC address, and traffic direction.

Fields on the first setting block:

Field

Description

Outgoing Default Action Specify the default action on the LAN to WAN bridging/forwarding path.

Incoming Default Action Specify the default action on the WAN to LAN bridging/forwarding path.

Function button for this first setting block:

Apply Changes

Click to save the setting of default actions to the configuration.

Fields on the second setting block:

Field

Description

Rule Action

Deny or allow traffic when matching this rule.

Direction

Traffic bridging/forwarding direction.

Source MAC Address

The source MAC address. It must be xxxxxxxxxxxx format. Blanks can be used in

the MAC address space and are considered as don’t care.

Destination MAC

Address

The destination MAC address. It must be xxxxxxxxxxxx format. Blanks can be used

in the MAC address space and are considered as don’t care.

Function buttons for this second setting block:

Add

Click to add the rule entry to the configuration.

Summary of Contents for 8520-R1




































































































































Search results

Summary of Contents for 8520-R1

Reviews:

Innoband 8520-R1, User Manual, Page: 71 / 131

Search results

Summary of Contents for 8520-R1

Reviews: