![Innoband 4000-R1 User Manual Download Page 67](http://html.mh-extra.com/html/innoband/4000-r1/4000-r1_user-manual_2062343067.webp)
67
5.
I forgot my password.
Ans.
Reset the Wireless N Gigabit Router to factory default by pressing the Reset button
for about 5 seconds and then releasing it. The default User Name and Password is
admin
/
admin
.
6.
What is ad-hoc mode?
Ans.
When a wireless network is set to ad-hoc mode, the wireless-equipped computers are configured
To communicate directly with each other, peer-to-peer without the use of an access point.
7.
What is infrastructure mode?
Ans.
When a wireless network is set to infrastructure mode, the wireless network is configured to
communicate with a network through a wireless access point.
8.
What is roaming?
Ans.
Roaming is the ability of a portable computer user to communicate continuously while moving
freely throughout an area greater than that covered by a single access point. Before using the
roaming function, the computer must make sure that it is the same channel number with the
access point of dedicated coverage area.
9.
What is ISM band?
Ans.
The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use
in the ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in
particular, is being made available worldwide. This presents a truly revolutionary opportunity to
place convenient high-speed wireless capabilities in the hands of users around the globe.
10.
What is MAC Address?
Ans.
Short for
Me
dia
A
ccess
C
ontrol Address. It is a hardware address that uniquely identifies each
node of a Ethernet networking device. This address is usually permanent.
11.
What is IEEE 802.11b standard?
Ans.
IEEE 802.11b is an extension standards to 802.11 that applies to Wireless LAN and provides
11Mbps transmission speed in the 2.4 GHz band.