Innoband 4000-R1 User Manual Download Page 54

Page: 54 / 83

4.6.7 Firewall – VLAN

Traditionally, networks are segmented by hardware. VLAN are logical subgroups of a LAN that are

segmented with the use of software. This router has the capability to supports Port-based VLAN.

Fields in this page:

Field

Description

Enable VLAN

Check to enable VLAN. Default: Disabled.

Enable

column

Checkbox to allow user to select which port to enable VLAN.

Ethernet/ Wireless

column Displays the information of each port.

WAN/ LAN

column

Displays the location of the port.

Tag

column

Checkbox to allow user to select which enabled port requires VLAN Tagging.
The corresponding column is VID.

VID

column

When

Tag

enabled, user needs to enter the

VLAN Tag ID

here. VLAN Tag

ranges from 0 – 4096.

Priority

column

When more than 1 port VLAN is created,

Priority

for each VLAN needs to be

selected here. Priority ranges from 0 – 7.

CFI

column

Canonical Format Indicator (CFI). Check to set MAC Address in non-canonical
format. Ethernet switches always use canonical format. Default: Unchecked.

Function buttons in this page:

Apply Changes

Click to save the setting to the configuration.

Reset

Click to abort change and recover the previous configuration.

Summary of Contents for 4000-R1




















































































Search results

Summary of Contents for 4000-R1

Reviews:

Related manuals for 4000-R1

Brands by name

Popular brands

Innoband 4000-R1, User Manual

Search results

Summary of Contents for 4000-R1

Reviews:

Related manuals for 4000-R1

Brands by name

Popular brands