8. Opening the ports for INNO-Flex hose DN 75:
Open to any distribution base, the terminal port
Z
in the
required number.
Note:
1 piece is perforated for production reasons, these
must always be connected with, or hermetically sealed.
Remove any burrs with sandpaper.
Slide the INNO-Flex hose DN75 with the prescribed and pro-
perly fitted for poetry in the open socket connection to this is
fixed.
When embedding of the manifold, the hose connections
are fixed in position using cold shrinking tape.
Do the same for all other connections.
When using INNO-Flex hose DN 63, use the reductions
RED75/63 (Art.No. 2.015) with the respective seals DN 75
and DN 63.
9. Mounting of the distributor:
The distributor can be attached to the ceiling with floor
screws M8, which is 2 passes provided to the left and right of
the distributors.
Note: When moving the pipe connections with central distri-
bution, such as by turning the second Manifold at 180° were
present, not more about each other passages. The attach-
ment of the lower manifold is then punched tape or similar
means produce.
If you have any problems with your ventilation system, you
should first contact to the specialist installer who has made
the installation of the system. If this is not possible, please
do not hesitate even to us:
INNO-Products GmbH Deutschland
Dorfgütingen 52
DE-91555 Feuchtwangen
INNO-Products GmbH Switzerland
Münchensteinerstr.43
CH-4052 Basel
fon: +49 (0) 98 52 - 61 38 - 08
fax: +49 (0) 98 52 - 61 38 - 10
mail: [email protected]
www.inno-products.de
This product is in its type, design and functionality for utility
model protection (Nr. 20 2006 013 503 0).
Instruction Manual
© INNO-Products GmbH - Print-No. 1031.2.GB 01.2009 as of INNO-Flex-distribution is subject to change. Illustrations and specifications are subject 4
Z
INNO-FLEX-Distribution-Box
