Inngenso IT WiFi v2, Manual

Page: 38 / 54

38
Setting the operating mode
Heating
In heating mode, the output of the receiver gets activated,
when the set temperature is higher than the measured tem-
perature. The corresponding heating symbol is then shown
on the control panel.In cooling mode, the output of the
receiver gets activated, when the set temperature is lower
than the measured temperature. The corresponding cooling
symbol is then shown on the control panel.
Cooling
In cooling mode, the output of the receiver gets activated,
when the set temperature is lower than the measured tem-
perature. The corresponding cooling symbol is then shown
on the control panel.
In the settings field on the home screen of the application or
via the settings tab in the menu that opens with the gear sym-
bol, there is an option “Operating mode”. By clicking on this
tab, a new pop-up opens, where you can choose between
heating or cooling as shown in the images on next page.
1.
Open the mobile app.
2.
Click the symbol in the upper right corner and then
click SETTINGS.
3.
Press on the Working mode, then pop-up will appear with
icons to choose between COOLING and HEATING options.
4.
After you pressed on desired option click save and exit
settings.