Inngenso IT WiFi v2, Manual, Page: 23 / 54

23
Operating via receiver
• When the receiver is in normal operation mode (AUTO
MODE), by clicking on the ON/OFF button, the receiver
turns off and goes to OFF MODE.
• If we want to turn AUTO MODE on the receiver, to change
the state from OFF MODE, it is necessary to click twice on
the ON/OFF button.
• If the receiver is in ON MODE, it is necessary to press the
ON/OFF button once to change the state to OFF MODE,
and then press the ON/OFF button again to change the
state to AUTO MODE.
• When the thermostat is in SYSTEM OFF mode, by press-
ing the ON/OFF button on the receiver, we exit from OFF
MODE to enter MANUAL MODE.
(SYSTEM OFF mode is a mode whose
state changes apply to all receivers that are connected to that thermostat)
• If we want to start Bluetooth Connect via the receiver, it is
necessary to hold the ON/OFF button until the blue color
appears on the receiver and then release the button.
• If we want to start SmartPairing mode via the receiver,
we need to hold the ON/OFF button until the green color
appears on the receiver and then release the button.
• If we want to start a FACTORY RESET via the receiver, it
is necessary to hold the ON/OFF button until the red color
appears on the receiver, and after that the receiver returns to
the factory settings, losing the connection with the thermo-
stat and internet connection (if they were previously saved).
After that, receiver enters SmartPairing mode to reconnect
with thermostat.