INNACOMM W3400V, User Manual

Page: 127 / 136

124
Step 5 In the PPP User name and Password page, enter the user name and
password provided by your ISP. Then, click Next .
Step 6 In the Enable IGMP Multicast and WAN Service page, keep the default
settings and click Next .
Step 7 Confirm the network configuration and ensure that all settings are
consistent with the data provided by your ISP. Then, click Save .
Step 8 Click Save/Reboot to apply the changes and reboot the modem.
You can also modify the PVC 8/35. To modify the LAN IP address and DHCP
server information, set in LAN in Advanced Setup .
After the dial-up is successful, the modem obtains the IP address at the WAN-side
port ppp_8_35_1.
Choose Device Info > Route and the route table is as follows.
4.3 MER + DHCP Mode
ME R
PC (s)
BR AS
STM -1
D SLAM
AD SL
ISP
H ub
192.168.1.2
192.168.1.3
192.168.1.1
D yna m ic P u blic IP
Assigned b y BR AS D HC P
Server
10 .2 8.10 8 .1
D H C P:10 .2 8 .1 08 .0
Description
In this example, the modem is connected to the DSLAM through PVC 8/35 and the
access mode is the MER+NAT. The downlink interface of BRAS is encapsulated in
1483B, the IP address is 10.28.108.1 and the DHCP Server is enabled, the
address pool is 10.28.108.* (2~254), and the IP address of the uplink interface is