LEVELING:
Adjust the location of
InMotion® Compact Strider
to ensure
InMotion® Compact Strider
sits on the floor without rocking.
MOVING:
Grasp the
REAR STABILIZER(2)
to move the
InMotion® Compact Strider.
Do not use the
PEDAL ARMS(3, 4)
to move the
InMotion® Compact Strider.
The
PEDAL ARMS(3, 4)
will
move and may pinch your hand or fingers.
FUNCTION INSPECTION:
Visually inspect the
InMotion® Compact Strider
to verify that assembly is as shown in the above illustration.
Check the function of the
InMotion® Compact Strider.
If you have good balance and are familiar with
the
InMotion® Compact Strider
, stand on the foot pedals. If you do not have good balance, sit in a chair
and place feet on the foot pedals. Slowly move your highest foot forward and follow the natural path of
the machine. Turn the crank slowly through one complete revolution to verify that the drive train functions
properly. Adjust the
TENSION KNOB(21)
and verify that the resistance changes.
CAUTION:
Locate and read the
WARNING LABEL(55)
on the
InMotion® Compact Strider.
Make sure
that all users read the
WARNING LABEL(55).
SET UP INSTRUCTIONS
8
Equipment Mat
Place the
InMotion® Compact Strider
in the area where it will be used. It is recommended that the
InMotion® Compact Strider
be placed on an equipment mat. The
InMotion® Compact Strider
is
approximately 24.3 inches long x 17 inches wide x 11.4 inches tall. (These dimensions may vary up to one
inch.) Make sure that adequate space is available for access to, passage around and emergency dismount
from the
InMotion® Compact Strider.
A minimum of 20 inches on at least one side and 20 inches either
behind or in front of the
InMotion® Compact Strider
is required for safe operation.
Summary of Contents for Compact Strider
Page 14: ...PRODUCT PARTS DRAWING BACK FRONT 14...
Page 18: ...NOTES 18...
