The safety and integrity designed into the
InMotion® Compact Elliptical Pro
can only be maintained
when the
InMotion® Compact Elliptical Pro
is regularly examined for damage and wear. Special
attention should be given to the following:
STORAGE
MAINTENANCE
14
1. To store the
InMotion® Compact Elliptical Pro,
simply keep it in a clean dry place.
2. The
InMotion® Compact Elliptical Pro
is approximately 24.8 inches long x 17.5 inches wide x 11.4
inches tall. These dimensions will vary. Please measure your
InMotion® Compact Elliptical Pro
if exact
dimensions are needed.
3. Grasp the handle located on the top of the product to move the
InMotion® Compact Elliptical Pro.
Do
not use the Pedal Arms to move the
InMotion® Compact Elliptical Pro.
NOTE:
A standard crank extractor tool is required to remove the
CRANKS(72)
from the
AXLE(73).
1. Adjust the
TENSION KNOB(21)
and verify that it functions properly and the resistance changes.
2. Inspect the
RESISTANCE TUBES(69)
for nicks and cuts. Replace damaged
RESISTANCE
TUBES(69).
3. Verify that the
WARNING LABEL(55)
is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520
for a replacement
WARNING LABEL(55)
if it is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5. Worn or damaged components shall be replaced immediately or the
InMotion® Compact Elliptical
Pro
removed from service until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the
InMotion®
Compact Elliptical Pro.
7. Keep your
InMotion® Compact Elliptical Pro
clean by wiping it off with an absorbent cloth after use.