Inmarsat LandPhone, Quick Start Manual, Page: 12 / 16

12
Note: You may need to make minor adjustments to the antenna’s
azimuth and elevation to obtain the maximum possible signal strength.
To do this, loosen the bolts holding the antenna in place, make the
necessary adjustment, and re-tighten the bolts.
Further guidance
If the satellite search does not complete automatically, the LCD
displays Enter Channel? In this case, you can register the terminal
manually.
To register manually:
1. Refer to the I-4 coverage map supplied at the back of this guide,
and select the channel number closest to your location.
2. Lift the telephone receiver. The LCD displays Channel 0:
3. Key in the two digit channel number, followed by # . The LCD
displays OK .
4. Replace the telephone receiver. This LCD displays Searching ,
followed by SAT and the full circle symbol.
Note: If you enter more than one channel number by mistake, delete
all channel numbers and re-enter the required channel number. Refer
to the LandPhone user guide for details.